June 2018

1925 Riley Redwing

[vc_row][vc_column][vc_column_text] Introduced in 1922, Riley’s ‘Redwing’ series was aimed squarely at the sporting motorist. With its distinctive polished aluminium coachwork (in either two- or four-seater

Read More »

Waiting for the new tyres

[vc_row][vc_column][vc_column_text]All mechanical aspects of our 1929 Hillman Fourteen recommissioning project are now complete. All levels have been monitored. Before we can let her back out

Read More »

More Jensen parts to chrome

[vc_row][vc_column][vc_column_text]A couple of extra parts to get re-chromed, an over-rider, brackets and oil filler cap. A few weeks time we’ll have these back and ready

Read More »

Belgravia Classic Car Show 2018

[vc_row][vc_column][vc_column_text]Following the success of the inaugural event last year, Belgrave Square Garden once again opened to the public with the second Belgravia Classic Car Show which

Read More »

MG B Tundra Green Restoration

[vc_row][vc_column][vc_column_text]We were recently commissioned to source and restore a matching number MG B in Tundra Green. Being a very rare colour originally, Tundra Green proved

Read More »

1968 Jaguar 240

Having been stored locally in a garage in Ipswich for many years our latest addition is our 1968 Jaguar 240. At present she’s a non runner

Read More »

Fitting up the E-Type pipework

Week 1 in our new Pettistree workshops and no slowing down for us as we continue to make good progress on our current projects.

Dave has been busy fitting up the new pipework and hoses to the engine bay of our 1971 Jaguar E-Type as we look to finish off the engine ready for the bonnet to be refitted.

With the bonnet taking up almost half of the entire car, when fitted, this will completely transform the look of the car and is always a sign of just how close we are to completion.

1925 Riley Redwing

[vc_row][vc_column][vc_column_text]

Introduced in 1922, Riley’s ‘Redwing’ series was aimed squarely at the sporting motorist.

With its distinctive polished aluminium coachwork (in either two- or four-seater form). Cardinal red wings, chassis, wheels and upholstery.

The Redwing (or Red Winger) was one of the most desirable light cars of its period.

The 1,496cc 10.8hp side valve engine had an aluminium crankcase with a detachable cast iron block and detachable head with a three-bearing crank.

This was mated to a four-speed non-synchro gearbox in a cast aluminium housing which transferred power to the spiral bevel drive rear axle via an open nickel chrome tubular steel propshaft.

Suspension was by semi-elliptic springs all round with Hertford friction dampers, attached to a shortened 9ft version of the excellent Riley touring chassis.

Steering was of the worm and full wheel pattern with front brakes only, although from 1925 four-wheel brakes were offered along with Marles-type steering. Wire wheels were standard, shod with 710 x 90 cord tyres.

Guaranteed to be capable of 70mph at 3,500rpm on level ground, the Redwing could safely rev to 4,200rpm so up to 90mph was attainable, especially downhill or with a following wind.

A born competition car, the Redwing became a favourite at MCC trials events and also did well at Brooklands with Victor Gillow winning the Light Car Handicap in 1924 at 77.5mph and achieving 81.63mph at the August Bank Holiday Meeting in the same year.

RW 4326 (Redwing) was registered on the 14/09/1925.

Going back as far as we can, this gorgeous rare car was owned by David Givertz of Leyton in 1946, Harold Moran of Richmond also in 1946, Robert West of Harwell near Didcot in 1948 and then into the family that owned her till now which was my friend Peters father, Douglas (Brian) Smith of Wantage. Douglas who was better known as Brian to all who knew him sadly died and it passed to his son Peter in 2006. Due to other family commitments we were recently lucky enough to acquire her.

Brian loved the car and it shows. His ethos was originality. Not over restored as you will see by the pictures.

The dilemma is that even in the second buff log book the aluminium body and wings were hand painted blue and Brian himself freshened up the paint in the same colour.

Here at Bridge we think that although everything else is definitely redwing, the body itself should be stripped and polished to match the bonnet and the wings repainted in its original cardinal red.

“We will see”.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type=”image_grid” images=”20154,20155,20160,20161,20156,20159,20162,20163,20157,20165,20166,20167,20146,20150,20151,20152,20153,20164,20168,20169,20148,20149,20158,20140,20141,20142,20143,20144,20145,20147″][/vc_column][/vc_row]

Waiting for the new tyres

[vc_row][vc_column][vc_column_text]All mechanical aspects of our 1929 Hillman Fourteen recommissioning project are now complete. All levels have been monitored. Before we can let her back out on the roads we’ve called upon our friends at Vintage Tyres for a new set of front tyres.

Graeme will soon be here from We Fit Any Tyres to fit them up and after one final test drive we can give her the all clear.

Here is our 1929 Hillman standing outside our new Woodbridge workshops in the sunshine waiting for the new tyres to arrive.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type=”image_grid” images=”20211,20212,20213,20214,20215,20216,20217,20218″][/vc_column][/vc_row]

Commissioning a new set of door handle gaskets

A big thank you to the guys at GP Products in West Sussex for producing a brand new set of Jaguar XJR door handle gaskets for us. Amazingly, these gaskets are almost impossible to find as spares (like a lot of spares for the XJR) so our only option was to commission a new set using a bespoke template.

Source: GP Products

Softcut

Our production plants produce ‘soft-cut’ gaskets from every conceivable type of flexible gasket material. Utilising the most modern methods of production we are able to supply special one-off and short run work on a variety of presses, including conventional hydraulic presses, CNC operated Milling cutters, Laser-Jet, Water-Jet cutting machines and just as importantly, from our hand-fabrication department. Using automatic presses, we also produce parts in multi-millions from all types of tooling. These parts can include simple washers for plumbing installation or insulators used in electrical switches. Larger components produced in bulk tend to go to industries such as Automotive or Domestic Appliance, where demands for today’s laboursaving devices are forever increasing. Soft-cut is a general term for gaskets produced in any material that is flexible – ranging from inexpensive gasket papers, through to Corks, Rubbers, Fibre based materials, Felts, Foams, Plastics etc., – all of the materials in our stock range are converted. Production is not limited to straightforward flat cut parts, we can also form parts into shapes. Material such as Leather is still used to produce cup washers for valves for instance and electrical insulation materials are often produced with bends and creases to give a continuous electrical resistant barrier inside many pieces of equipment.

Spiralwound

Spiral Wound gaskets are supplied world-wide to reliably seal flanges which are subject to arduous pressure and temperature conditions. This type of gasket is able to accommodate pressures from high vacuum to over 700 bar (10000 psi) and seal at temperatures from cryogenic to 1650°C. They are available in all metals and fillers, either to International standards, (ANSI B16.5, BS1560, BS10, BS4504,MSS SP44, DIN and AP1605) or custom made to individual sizes.

Flange

Tooling to produce pipe-flange gaskets for every conceivable table including BST, ANSI, JIS and ASA is used to make flat gaskets for industries including Petrochemical, Water, Gas and Sewage! With standard sized gaskets certain series are kept on the shelf for ex-stock deliveries, although many of our products are in stock materials that can be produced immediately for dispatch, often on the same day!

Metalic

Corrugated gaskets: Corrugated gaskets are ideal for irregular shapes and low pressure applications. They are available in a wide range of thin sheet materials. The gaskets can be faced with many different sealing materials such as PTFE, Non-Asbestos, Graphite, Rubber etc, to enhance their performance. Laminated with mineral boards and encased in a PTFE envelope they provide the standard sealing system for glass lined vessel flanges.

Metal clad gaskets: Metal clad gaskets can be manufactured in any specified combination of metal and filler material. Complex shapes are no problem. Heat Exchanger gaskets can be made in a one-piece construction or with welded-in pass bars to suit the application. Various different styles of gasket are available, the metal cladding around the softer core giving great strength and versatility to the gasket. With Rubber, Woven Ceramic, Non-Asbestos millboard, PTFE and Graphite available as fillers inside outer cladding made from Soft Iron, Soft Steel, Copper, Monel, Brass, Stainless Steel, Chrome Aluminium, Incoloy, Titanium, Inconel or Nickel a huge selection of sealing conditions can be met.

Solid metal gaskets: All types of solid and expanded metal gasket materials are used to produce items from simple flat washers and shims to specialised lens rings and grooved profiles. These can also be supplied with flexible sealing materials bonded or vulcanised to the surface where required to give more sealable surfaces (especially useful on damaged flange faces). Special expanded rubber faced metals are produced (mostly for automotive applications) that exhibit high sealing properties at extended temperatures. These materials are particularly suited to high temperature operating conditions where parts need to meet exacting tolerances and guaranteed working lives.

Metal reinforced gaskets: Various materials and configurations are utilised to manufacture flat gaskets used for many different applications. Using reinforcement layers made from wire strand, thin sheet, tanged (metal sheet pierced with a special hole design and configuration) and expanded metals the British Gaskets Group manufacture gaskets using material bases from Non-Asbestos to Graphite and Mica.

Removing our Stag’s Engine

We love to see our classic cars return to the workshops but we’d always prefer to see them for their annual service and maintenance schedules. Unfortunately on this occasion we welcome back our 1978 Triumph Stag, one of the amazing collection from Big Sky Classic Car Hire with a potentially big issue. Having been out on a recent rental the car developed a smoking and over heating issue.

We have managed to look over the engine with it still in situ and discovered some hoses being perished. There are also signs that these perished hoses may then have gone on to develop a larger issue of essentially ‘cooking’ the engine.

To truly diagnose the problem and hopefully rectify we have decided to remove the engine from the car and it looks to be a possible engine rebuild.

We will know more once the engine is out and we have full access to it.

As you may well know, the Triumph Stag engine is notoriously difficult to remove but with a little elbow grease and hard work we have managed to successfully remove ready for diagnosis.

1971 Bedford J Type work will soon commence

A late finish tonight at Bridge HQ as we finally met the owner f this wonderful Bedford J Type.

Since being here in Pettistree we have stirred up a huge amount of interest with the truck without actually undertaking any serious work.

Having a good look over the truck we had a good idea of the necessary tasks that would have to be carried out (refurbishing the radiator, over-hauling the brakes) but we needed to get a better understanding of the final objectives and now we have that information we have a good foundation to start the process.

At this stage, we will not divulge the final intentions for the truck but let’s just say we are all very excited to be able to have a big part in bringing her back to life.

…and no, she’s not for sale!!!!! haha

More Jensen parts to chrome

[vc_row][vc_column][vc_column_text]A couple of extra parts to get re-chromed, an over-rider, brackets and oil filler cap. A few weeks time we’ll have these back and ready to be fitted.

[/vc_column_text][/vc_column][/vc_row]

Jensen 541S: fitting up the new power steering

We are currently in the process of fitting up power steering to our 1960 Jensen 541S. Obviously not an original install when rolled out of the factory in 1960 but an excellent addition to the restoration.

EZ Power Steering specialise in power steering for classic vehicles. Their main offices are in Holland where they manufacture the items but they have represntation here in the UK in

An EZ Electric Power Steering system is completely hidden underneath the dashboard. The existing steering rack or box remains unchanged and thus retains the standard steering ratio and setup. The amount of assistance is fully adjustable and is sensitive to speed and load. They use CNC laser cut bespoke brackets designed to fit the original mounting points of your car. As no holes are drilled, with no cutting or welding to the chassis or body, the car can always be converted back to its original steering column. Under the bonnet there are no changes, everything remains as original. The advantages of an electrical system opposed to a hydraulic system are numerous. The electric motor only uses power when steering assistance is necessary whilst a hydraulic pump is continuously operating when the engine is running. A hydraulic setup generally uses around 4 bhp and therefore consumes extra fuel, even when driving straight ahead.

Because the electric power steering system is truly speed sensitive, it will steer light at low speeds and not become lighter at high speed. The amount of assistance can be selected by turning a potentiometer, so that the driver can select the desired feel (i.e. more assistance with wider tires and/or a smaller sports steering wheel’. With a classic hydraulic system there is usually little feel and no possibility to adjust this at all.

In the unlikely event that the electric power steering system has a defect, the car would steer exactly like it did prior to power steering conversion. If a car fitted with an hydraulic system would have a fault the car would steer extremely heavy.

The EZ Electric Power Steering works without making a sound. It can not leak and is completely maintenance-free.

EZ Power Steering are no strangers to the Jensen 541S but ours happens to be a unique one. Unbeknown to everyone, when the new power steering system arrived is wouldn’t fit eaxctly where it needed to which left both us and them a little confused.

It turns out that the automatic transmission makes a difference to the install and only having experienced a manual Jensen they are having to rebuild the system. This means the old column and new column have been returned to Holland and we await its arrival.

 

Getting our 1928 Hillman back on the Suffolk roads

Work as begun on the re-commissioning of our 1928 Hillman Fourteen.

She has been very well looked after over the years but as she has been standing for some time without a lot of use the owner has agreed for us to have her in the workshops for a full health check ready for the summer.

Source: Hillman 14 Wikipedia

The Hillman Fourteen is a medium-sized 4-cylinder car announced by Hillman’s managing director Spencer Wilks, a son-in-law of William Hillman, at the end of September 1925. This new Fourteen substantially increased Hillman’s market share and remained on sale into 1931. During this time it was the main product of the company.

Belgravia Classic Car Show 2018

[vc_row][vc_column][vc_column_text]Following the success of the inaugural event last year, Belgrave Square Garden once again opened to the public with the second Belgravia Classic Car Show which took place on Sunday 24 June 2018.

The event showcased 150 of some of the finest motors throughout history and also featured live music, swing dancing and a range of food stalls.

Our roving reporter ‘Cousin Claire’ unfortunately forgot to invite us along to enjoy the day with her but I have managed to pinch her photos of the day…and ‘technically’ it’s not copyright infringement because we are family!![/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type=”image_grid” images=”20029,20030,20031,20032,20033,20034,20035,20036,20037,20038,20039,20040,20041,20042,20043,20044,20045,20046,20047,20048,20049,20050,20051,20052,20053,20054,20055,20056″][/vc_column][/vc_row]

Fabricating the new door skin

The thick layer of external filler has now been successfully removed and a new door skin has been rebuilt and fitted. We are not too far away now from having the body shell ready for paint.

DH Coaching & Consulting out in her Aston

‘Hugo ready for his first driving lesson’.

Our good friend Danielle, Director of DH Coaching & Consulting and Hugo enjoying a day out with Hugo in her Aston Martin.

Our neighbours at Le Mans

They put us next to the noisy, rowdy lot this year at Le Mans this year but we didn’t mind…

MG B Tundra Green Restoration

[vc_row][vc_column][vc_column_text]We were recently commissioned to source and restore a matching number MG B in Tundra Green.

Being a very rare colour originally, Tundra Green proved to be a very difficult find but having searched the country high and low we eventually found an abandoned matching number car suiting our criteria perfectly.

We now have the car back in our new workshops in Pettistree and will be future restoration for us at Bridge Classic Cars.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type=”image_grid” images=”19997,19996,19995,19994,19993,19992,19991,19990,19989,19988,19987,19986,19985,19984,19983,19982,19981,19978″][/vc_column][/vc_row]

Correcting the running issues on our 1979 Ford Escort

The original task was to install new, upgraded carbs to our 1979 Ford Escort but having seen the carbs that Mr B was hoping to have fitted we advised that this would not be a suitable choice.

Whilst in, we decided to correct the running issues that had occurred. We carried out a cylinder leakage test and adjusted the valve clearance. we replaced the spark plugs and the gaskets.

We were also informed of a stop light issue on the rear so whilst in our workshops we fixed the fault.

Riley Redwing History

About the little ‘Redwinger’

Here we have some old cuttings relating to the origins of our little 1925 Riley Redwing.

A Very Special Car: 1925 Riley Redwing Coming Soon

The Riley Redwing (or Red Winger) was one of the most desirable light cars of its period.

This particular model is believed to be 1 of only 4 ever produced. Currently en-route to join the Bridge Classic Cars family, this very special car will soon be with us and available to buy.

Bridge Classic Cars Is Recruiting

Would you like to join one of the most successful car restoration companies in the U.K?

As the move to our new bespoke premises in Pettestree near Woodbridge is nearing completion we are looking for new stars to join us.

If you have the experience we have the facilities…

Time served motor mechanics and restorers required to join our amazing team.

Our website will give you the standards we work to and the exciting cars we get to work on.

We are currently looking for talented people to join our journey.

Your preferred skills are in general mechanics, welding, auto electrics, engines, braking systems, body preparation and paint.

We are not looking for one person who can do it all, we are looking for an experienced team of exceptional talent that can work together to do it all.

One of the most exciting prospects will be our new purpose built paint shop and vehicle preparation area.

If you think you have the talent to compliment our team then email your CV to info@bridgeclassiccars.co.uk or call us on 01473 742038 for a chat.

1968 Jaguar 240

Having been stored locally in a garage in Ipswich for many years our latest addition is our 1968 Jaguar 240.

At present she’s a non runner with the brakes completely seized but after a little TLC we’ll have her back up and running in no time.

Due to our current workload we are considering selling her on as a restoration project but we’ll see.

New arrival: 1971 Bedford J Type Truck

New arrival to Bridge Classic Cars, our 1971 Bedford J Type Truck is in with us a future project. At this early stage we are unsure what the end result could be as the owner has many ideas for her new life.

All we know is that she has spent the majority of her life in New Zealand before landing on UK shores a few years back and has since been stored with little to no use.

The brand new windscreen is manufactured

The order was placed at the back end of 2017 so it has been a long wait for the production of our Jensen 541S windscreen but the wait is over.

Due to the rarity of the car itself there are very few, if not any, brand new screens still in existence.  We therefore commissioned for a brand new screen to be manufactured in Finland and due to complications in the factory a 4 week lead time ended up being 7 month lead time but the wait is finally over.

The screen has arrived and along with the brand new rubber is now fitted and in position.

Refurbishing the XJR Wheels.

Our wheels have returned fully refurbished thanks to the guys at Wheelworx in Bury St Edmunds.

Now fitted on brand new Continental 225 45 17R tyres supplied by Ken and the team at Fast-Fit next door.

We are now on the final stages of the restoration with just the finishing touches to complete. The paint imperfections are now being completed and then it’ll be a trip back to Demand Engineering for the exhaust tailpipes to be fitted and then we are looking at a final once over before she heads back home.

British Heritage, Classic and Sports Cars

[vc_row][vc_column][vc_column_text]We had an amazing day at Sandown Park Race Course for Barons British Heritage, Classic and Sports Cars auction.

In the auctioneer’s words the ‘star of the show’ was our stunning 1975 Maserati Merak, generating a huge amount of attention on the day with many admirers speaking to us personally to learn about the journey we took with the restoration of this car.

With a guide price of between £65000 and £80000 someone got themselves a fantastic deal when the hammer dropped at £69000. Not the result we were looking for with our expectations being more in the region of £95000 but the deal has been done. She’s now off to enjoy her new life with her new owners.

Having loaded her up the day before from our new Pettistree premises, we set off on the road early and it was great that we did as we got a fantastic position within the auction hall on the day.

[/vc_column_text][vc_gallery type=”image_grid” images=”19894,19892,19891,19890,19889,19888,19881,19874,19875,19882,19883,19884,19885,19886,19887,19880,19879,19878,19877,19876,19871,19872,19873″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]She even made the front cover, looking lovely outside Priory Park.

[/vc_column_text][/vc_column][/vc_row]