Back in Place – Installing the Rebuilt Injection Pump on the Land Rover Series IIA

By Craig Ranson
By Craig Ranson

Managing Director – Bridge Classic Cars

When work began on this 1970 Land Rover Series IIA, there was a slight bit of confusion. Originally it was thought to be a Series III but thankfully, we have Scott who drives a Series II every day to work.

The other bit that had us scratching our heads somewhat was working out what engine it. The last MOT certificate stated it was petrol, but once Ady opened up the bonnet he was faced with an Injection Pump and Glowplugs. Meaning that sometime between then and now, a diesel engine had been put in its place.

Either way, we need to get the Series IIA running. So, our in-house engine wizard Ady had the injection pump sent off to a nearby specialist to be rebuilt and tested. Within a couple of days, the pump was back here at Bridge Classic Cars.

Next Ady had noted some wiring that didn’t quite make sense. A positive cable leading from the glowplug to the frame, in the same way a ground would be routed. After looking into the matter to be double sure, Ady removed the old wiring and rewired up the glowplug to the correct set-up.

Now, it is time to prep the engine for its first fire-up since being with us. Which you will see very soon here on the Bridge Classic Cars blog

Share this post
Enjoyed this article by Craig Ranson?
Email Craig Ranson