Bonnet prep for the Honda!

Lydia has been getting the Honda Integra bonnet ready for re-painting.

She started off by sanding down the paint, to the original metal, on the front/face of it, where any dents were showing. Skims of filler were then applied over the tops of where it had been sanded. The filler then also got sanded down once dry, to create a smooth finish for painting.

The underneath of the bonnet was gone over with panel wipe and a red scotch pad to remove the shine of the paint and to clean off any dirt. Corrosion spots were sanded down to bare metal with a DA and painted with treatment to stop any more spreading of the corrosion.

Share this post
Share on facebook
Share on twitter
Share on pinterest