More parts to prepare on Integra
July 10, 2021
Lydia is continuing to work through parts of our Honda Integra to get the panels stripped, cleaned, prepared and ready for paint.
1998 Honda Integra Type R
Prep for the Honda Integra!
July 8, 2021
Lydia, can normally be found in the trim shop, has been helping out with getting the Honda Integra ready for a re-paint. She’s been sanding
Cleaning and Preparing Honda Integra Parts
July 7, 2021
Lydia has taken a step away from the trim shop to join James C and James P in the preparation area. Parts for the Honda
Integra Sanding And Fabricating
July 6, 2021
Pricey and Lydia have been working on our Honda Integra. Lydia has been sanding down various panels in preparation for paint whilst James has been
Sanding Down The Integra’s Bumper
July 5, 2021
Lydia has been sanding down our 1998 Honda Integra bumper panels and front grill ready for more restorative work to be done on it.
Honda gets shiny!
July 2, 2021
Pricey has been repairing one of the rear sides of the Honda Integra. First of all, he welded a new inner arch, grinded it and
Honda Integra’s New Wheel Arch
July 2, 2021
Pricey has been continuing his work on our 1998 Honda Integra. He’s currently making up a new rear wheel arch and shaping up the arch.
Honda Integra’s Rust Bust
June 30, 2021
Pricey has been working hard on our 1998 Honda Integra to solve the rust issues. He’s taken apart the front nearside corner and welded in
Honda Integra Seats Cleaned
June 29, 2021
Just look at the difference after the Honda Integra Recaro seats have been cleaned! They came in looking a little worse for wear but now,
Honda Integra’s Dismantling Begins
June 23, 2021
Pricey has begun to strip down our 1998 Honda Integra so that we can address the request for a re-spray. Pricey has also begun correcting
Honda Integra Type R In For Work
June 22, 2021
This 1998 Honda Integra Type R has come in today to have some paintwork attended to. We’re removing the engine and gearbox to be able
More parts to prepare on Integra
July 10, 2021
Lydia is continuing to work through parts of our Honda Integra to get the panels stripped, cleaned, prepared and ready for paint.
Prep for the Honda Integra!
July 8, 2021
Lydia, can normally be found in the trim shop, has been helping out with getting the Honda Integra ready for a re-paint.
She’s been sanding down various panels, including the front grill, spoiler, wing mirror surrounds and fuel tank cover. Most of the panels only needed a light sanding with a DA and soft sanding by hand afterwards. Any imperfections that were found in any of the paint, such as trapped air bubbles and chips, Lydia sanded down to the original bare plastic and feathered out. The underneath of all the different panels were cleaned to remove any residues that could get into the new paint.
Cleaning and Preparing Honda Integra Parts
July 7, 2021
Lydia has taken a step away from the trim shop to join James C and James P in the preparation area. Parts for the Honda are now in the process of being cleaned and prepared. The door handle surrounds and wing mirrors are being prepared, ready for paint.
Integra Sanding And Fabricating
July 6, 2021
Pricey and Lydia have been working on our Honda Integra. Lydia has been sanding down various panels in preparation for paint whilst James has been taking apart the internal panels around the arch and fabricating new parts.
Sanding Down The Integra’s Bumper
July 5, 2021
Lydia has been sanding down our 1998 Honda Integra bumper panels and front grill ready for more restorative work to be done on it.
Honda gets shiny!
July 2, 2021
Pricey has been repairing one of the rear sides of the Honda Integra.
First of all, he welded a new inner arch, grinded it and then dressed it up. He then went on to fabricate the inner wheel arch. Next, was to clean surface corrosion off the outer wheel arch and treat it, panel beat out any damage, and prime with zinc.
The inner sills needed repairing as well, the sill closing and middle sill both had corrosion, and the lower sill panel had jack damage and corrosion. He welded and fabricated them all before going back in.
Honda Integra’s New Wheel Arch
July 2, 2021
Pricey has been continuing his work on our 1998 Honda Integra. He’s currently making up a new rear wheel arch and shaping up the arch. When he removed the arch it revealed a rotten inner sill and inner arch which he has worked to improve.
Honda Integra’s Rust Bust
June 30, 2021
Pricey has been working hard on our 1998 Honda Integra to solve the rust issues. He’s taken apart the front nearside corner and welded in new parts as well as the rear nearside wheel arch.
Honda Integra Seats Cleaned
June 29, 2021
Just look at the difference after the Honda Integra Recaro seats have been cleaned! They came in looking a little worse for wear but now, after a thorough wash, they’re looking good as new again!
Honda Integra’s Dismantling Begins
June 23, 2021
Pricey has begun to strip down our 1998 Honda Integra so that we can address the request for a re-spray. Pricey has also begun correcting a rusty rear arch and made a note that a sill also needs addressing. We’ve also noted some accident damage on the front right hand corner that we will address at the end of our process.
Honda Integra Type R In For Work
June 22, 2021
This 1998 Honda Integra Type R has come in today to have some paintwork attended to. We’re removing the engine and gearbox to be able to sandblast and paint corroded under bonnet bracketry and weld in new metal to replace parts lost to corrosion.
We’re also refurbishing the wheels and replacing 4 bolsters on the front seats.
