Key Points – Progress on the 1970 Bristol 411

By Craig Ranson
By Craig Ranson

Managing Director – Bridge Classic Cars

The restoration team in the Bridge Classic Cars restoration workshop at our Suffolk HQ have been making progress on the 1970 Bristol 411 in for its left hand drive conversion.

The team have begun the work by rebuilding and fitting out the modified firewall/bulkhead with the necessary systems moved from one side of the firewall to the other. This has been done for the next stage where the team have fitted up the heater hoses and pipes from the heater box under the dashboard of the classic Bristol.

After this, the team moved to the underside of the car to begin work on several jobs that need to be completed. The first, was to fit the newly fabricated jacking plates onto the car. These could now be fitted after the repairs carried out to the sills of the car and everything being structurally sound.

Next, was a quite badly corroded area in the battery compartment of the classic Bristol. This was cut out with a new plate welded in its place to strengthen the floor of the area.

Whilst under the car, the team noticed some corrosion to boot floor support which had been filled with fibreglass but corroded through to the boot floor on the near side rear of the car. This area was carefully marked and cut out of the car in preparation for the new piece to be templated and welded into the car making the boot floor stronger and sealed.

Share this post
Enjoyed this article by Craig Ranson?
Email Craig Ranson