Lilac Jensen Update: Engine And Head Cloth

By Craig Ranson
By Craig Ranson

Managing Director – Bridge Classic Cars

Ady has almost completed fitting the engine back together after its full re-build, part of which was done here and part of which was done at Scholar.

The engine was originally stripped down and inspected for issues when Ady found that the engine needed to be re-bored to suit new pistons. The crankshaft was also reground and new bearings were fitted. Ady also fitted new oil pumps, rear seal conversion on the rear of crankshaft, new core plugs, new timing chain and new camshaft followers. The cylinder head is currently at Coltec, having an unleaded conversion and a reface.

Lydia has started on remaking the headlining on the lilac Jensen project. She first cleaned up all the metal poles that go into the loops across the headline and then inserted the poles inside the loops.

Lydia has also been working on the front seat squab. She began by marking it up so she would know how the pieces go back together, beginning by taking the back of first and then the front covers and adding in 3mm of foam. She then glued in some calico onto the back board to strengthen it when sewing. Lydia then made and added piping to go around the back board and covered the front of the backboard with new white leather. She then glued and sewed the piping in place. She then started making the pocket by drawing around an the original one onto the new leather, sewed the elastic in the top and tacked the folds in place at the bottom. Lydia then folded the edges under and glued the pocked onto the backboard.

Brian has also been working on this Jensen alongside Lydia and has bade the rear seat centre section of of the new leather. He begun by marking out the fabric, adding in extra foam and gluing the cover over the centre, pulling tight the leather over the sides. He’s also re-glued the foam back in place for the front seat squab which was done after he removed the old foam. Brian then made the new wood section for the bottom of the seat frame and added new foam to the side sections. New foam has been added to the middle section for the back of the squab.

Share this post
Enjoyed this article by Craig Ranson?
Email Craig Ranson